Mercury

 

Introducing the Teledyne Leeman Labs Series of Mercury Analyzers

Teledyne Leeman Labs family of Mercury Analyzers are fully automated instruments that address the analysis of solids, semi-solids and liquids. They are equipped to assist today’s laboratory technician, chemist or lab manager in meeting the myriad of challenges that face today’s modern laboratory. Our high-performance fully automated analyzers are the number one choice for laboratories searching for a mercury analyzer with a proven track record. We stand behind our mercury analyzers with a no-hassle support team ready to serve you.

Hydra 2 AA

Hydra AA

Our mercury analyzers are easily maintained with readily accessible consumable items and commonly serviced parts. The commonality of consumable items and serviced parts ensures that parts will be available for years to come. Our mercury analyzers are backed by a one-year warranty. An extended warranty service is also available with options of depot repair or on-site service provided by our field service network to minimize down time.

Hydra IIAA Mercury Analyzer

Hydra IIAA Mercury Analyzer delivers both the performance needed to meet tightening regulatory demands and the productivity needed for laboratories to operate efficiently. Its part-per-trillion detection limits, exceptional stability and unique over-range protection easily satisfy the most stringent QCs. Its high capacity autosampler with extra large CCV/CCB containers permits long periods of unattended operation.

Hydra IIAA Mercury Analyzer Delivers:

Performance

 

Achieve Lower Reporting Limits

≤ 5ng/L Detection Limit

Perform Fewer Dilutions

Dynamic Range from ng/L to mg/L

Analyze Difficult/Foamy Samples

3rd generation gas/liquid separator

Satisfy QCs with Ease

Excellent long-term stability

Eliminate Sample Preparation

Direct Analysis Option

Productivity

 

High Capacity Autosampler

  • 180 sample capacity with option to go to 270 sample capacity rack
  • Large CCV & CCB reservoirs
  • Smart Rinse to minimize sample cycle

Advanced Contamination Control

  • Unique Over-Range Protection
  • Flow through rinse
  • Interchangeable sample introduction

 

Unparalleled Support

  • Built-in Maintenance schedule
  • On-line audio/visual help
  • Overnight service

Common Methods

  • EPA Method 245.1
  • EPA Method 245.5
  • EPA Method 245.6
  • EPA Method 7470A
  • EPA Method 7471B
  • EN 1483
  • EN13806
  • ISO 12846

For more information on applications, capabilities, configuration and models you can visit the Teledyne Leeman lab site at:

http://www.teledyneleemanlabs.com/product/Mercury_Analyzers/Pages/Hydra-IIAA.aspx

 

M-7600

M-7600

QuickTrace® M-7600 Mercury Analyzer

The QuickTrace® M-7600 Cold Vapor Atomic Absorption (CVAA) Mercury Analyzer easily achieves the ultra-trace mercury detection limit of < 0.5 ng/L demanded by customers employing performance based EPA method 245.7. The QuickTrace® M-7600 is ideal for ultra-trace to sub-mg/L mercury quantitation. The M-7600 is designed for routine and research use in a variety of settings, including environmental laboratories, industry, and research institutes, for virtually any aqueous acidified sample.

The QuickTrace® M-7600 Cold Vapor Atomic Absorption (CVAA) mercury analyzer combines the proven technologies from its predecessors along with TCP/IP communication. TCP/IP technology guarantees that data collection performance will be a stable format for years to come. An Ethernet adapter is included for dedicated control. To simplify the installation, we pre-configure the TCP/IP communications per your laboratories preferences.

The QuickTrace® M-7600 is used to analyze samples that include water and waste-water, soil and sediment, and biological tissues and fluids. The QuickTrace® M-7600 is ideal for ultra-trace to sub-mg/L mercury quantitation. The QuickTrace® M-7600 is designed for routine and research use in a variety of settings, including environmental laboratories, industry, and research institutes, for virtually any aqueous acidified sample.

The QuickTrace® M-7600 mercury analyzer is also versatile enough to analyze samples > 500 μg/L without dilution. The QuickTrace M-7600 is capable of switching between low mg/L and ng/L analysis without hardware or tubing configuration changes. Using the proven and reliable CVAA technique combined with multi-tasking Windows-based software package, the QuickTrace® M-7600 is the most stable and sensitive mercury absorbance analyzer available today. For ultra-trace analysis we recommend our autosampler enclosure (ENC-500) to protect the samples from determinate errors such as dust particles. The ENC-500 will also protect your investment from the harsh acid gases normally present in and around digested acidified samples.

Performance

Excellent short and long term stability are found in our QuickTrace® M-7600 CVAA analyzer. Less than 0.3 ng/L instrument detection limits are typical for this analyzer while utilizing less than 4 minutes of sample time and less than 25 mL of sample.

  • Ultra-trace detection limits (< 0.5 ng/L IDL)
  • Linearity greater than 4 orders of magnitude
  • Dynamic range < 0.5 ng/L to > 500 μg/L
  • Without employing our smart rinse technology the system is ready to accurately measure a sample within four minutes following the ingestion of a 1 mg/L sample
  • Short term precision (%RSD @ 95% Confidence) < 1.2% @ 20 ng/L, n=5
  • Short term precision (%RSD @ 95% Confidence) < 6.0% @ 5 ng/L, n=5

Common Methods

  • EPA Method 245.1
  • EPA Method 245.5
  • EPA Method 245.6
  • EPA Method 245.7
  • SW 846-7470
  • SW 846-7471
  • EN 1483
  • EN 13806
  • ISO 12846

For more information on applications, capabilities, configuration and models you can visit the Teledyne Leeman lab site at:

http://www.teledyneleemanlabs.com/product/Mercury_Analyzers/Pages/M-7600.aspx

 

M8000

M8000

QuickTrace® M-8000 Mercury Analyzer

The QuickTrace® M-8000 Cold Vapor Atomic Fluorescence (CVAF) Mercury Analyzer is ideal for ultra-trace to sub-mg/L mercury quantitation. It easily achieves the ultra-trace mercury detection limit of < 0.05 ng/L demanded by customers employing EPA method 1631. The QuickTrace® M-8000 is also versatile enough to analyze samples > 400 μg/L in a research or industrial setting without dilution. 

QuickTrace® M-8000 CVAA Mercury Analyzer

Depending on your laboratory’s requirements, the QuickTrace® M-8000 mercury analyzer supports three modes of operation:

Mode 1: Cold Vapor Atomic Fluorescence Spectroscopy (CVAFS)

Mode 2: Cold Vapor Atomic Fluorescence Spectroscopy Single Gold Trap Amalgamation (CVAFS-SGTA)

Mode 3: Cold Vapor Atomic Fluorescence Spectroscopy Double Gold Trap Amalgamation (CVAFS-DGTA)

The mode can be changed in software, without hardware or tubing configuration changes.

Why is it so important to have a system that switches between ultra-trace analysis and low mg/L analysis with only the opening of a new method? These innovative features save you set up time and eliminate costly mistakes.

Teledyne Leeman Labs also employs cost saving features during the gold trap desorption such as shutting down the flowing rinse and slowing the SnCl2 flow. These innovative features can save the laboratory thousands of dollars per year by reducing reagent and waste costs.

Using the proven cold vapor atomic fluorescence (CVAF) technique combined with multi-tasking Windows® based QuickTrace® software package, the QuickTrace® M-8000 is one of the most stable reliable fluorescence analyzer available today.

For ultra-trace analysis we recommend our autosampler enclosure (ENC-500) to protect the samples from determinate errors such as dust particles. The ENC-500 will also protect your investment from the harsh acid gases normally present in and around digested samples.

 

Performance

Excellent short and long term stability are found in the QuickTrace® M-8000 CVAF analyzer. Less than 0.02 ng/L instrument detection limits are typical for the QuickTrace® M-8000 gold trap modes utilizing less than 25 ml of sample. We consistently achieve non-gold trap instrument detection limits of less than 0.1 ng/L utilizing less than 10 ml of sample.

  • Ultra-trace detection limits (< 0.05 ng/L IDL)
  • Linearity greater than 4 orders of magnitude
  • Dynamic range < 0.05 ng/L to > 400 μg/L
  • In Mode 1 by response comparison to a 100 ng/L standard, the system exhibits < 0.01% memory effect of a 1 mg/L standard immediately following the ingestion of a 1 part per million (mg/L) sample.
  • In Mode 1 without employing our smart rinse technology the system is ready to accurately measure a sample within four minutes following the ingestion of a 1 ppm sample
  • Mode 2 & 3 – Short term precision (%RSD @ 95% Confidence) = 2.5% @ 5 ng/L, n=5

 

Common Methods

  • EPA Method 245.7
  • EPA Method 7474
  • EPA Method 1631
  • EN-12338
  • ISO 17852

 

For more information on applications, capabilities, configuration and models you can visit the Teledyne Leeman lab site at:

http://www.teledyneleemanlabs.com/product/Mercury_Analyzers/Pages/M-8000.aspx

 

 

Hydra C

Hydra C

Hydra IIC

The Hydra IIC is a fully automated turnkey analyzer that measures mercury in solid and semi-solid sample matrices directly without any acid digestion (sample preparation). The system employs the technique of sample combustion (thermal decomposition), mercury concentration via gold amalgamation and detection by cold vapor atomic absorption.

The biggest advantage of the Hydra IIC is that no sample preparation is required before analysis. And, because no sample preparation is required; the cost and hassle of dealing with waste disposal is avoided.

The following are some of the highlights of the Hydra IIC‘s capabilities:

  • No sample preparation required; no waste generated
  • Wide dynamic range with extended range option
  • Excellent sensitivity; no sample dilution required
  • Easy calibration; matrix independent
  • Electronic transfer of sample weight
  • Simple “plug and play” design makes preventative maintenance a snap
  • “On the fly” sample can be easily accommodated

 

Common Methods

  • EPA Method 7473
  • ASTM D6722

For more information on applications, capabilities, configuration and models you can visit the Teledyne Leeman lab site at:

http://www.teledyneleemanlabs.com/product/Mercury_Analyzers/Pages/Hydra-IIC.aspx